Prepare a circuit with Havi elements in this order: Power element + motor element + IR element + LED element + LED element.
Let’s make the base first. Take a thick thermocol sheet. Cut the sheet in rectangle shape and make a space for the geared motor. Also attach the IR LED with Double sided tap as given below:
To make the LED stripe, take a construction paper, cut it as shown here. Make the holes in the center of the stripe to place LEDs. Attach the LED wires as per the image.
To make a wheel, cut the cardboard in a circle with a compass. Attach the geared motor to the center of the disk with a glue gun. Also make three cuts on the wheel as described in the figure. The wheel is ready.
Place the geared motor on the base. Attach the stripe over the wheel.
Attach the LED wires with LED element and IR LED with IR element. Connect the whole circuit with the power bank.
How does it work?
As the power turns on, the motor will start. Due to that, the wheel will start rotating. The IR on the thermocol sheet will detect the rotating wheel, and will pass the YES signal. Once the LED element receives a YES signal, LEDs will be turned on. But due to rotation of the wheel, there will be times when IR will not detect the wheel due to the cuts on it. At that time, it passes NO signal and LEDs will be turned off.
Advantages when implemented in the real world.
Surprise your friends in a unique way on their birthday. Also you can present this project in your school science fair. A perfect example of STEAM!
Liked this article? Share with your friends
If you love to play, perform, or create new things, and you also want your kids to do the same, let us be friends.
[time_change], 6 PM IST, on zoom call.
A class of Technology and future skills for age 5 to 15.
Get an invite
Error: Contact form not found.
Your cart is empty
Thank you for visiting Havi.co
How can we help you?